Eric@TCGMiami
07-29-2007, 11:20 AM
For 3 months I have been gathering information on doing this. No one has put together a full Do It Yourself on this, So here you go and enjoy!
Ps. Try at your own RISK!
First off I ordered a Autosport Wiring Harness so i didn't have to be upside down in the car to splice everything and have some type of error pop up.
The advantage of having this harness is to not have to cut the Factory wiring, and ease of installation. It comes Pre-Labeled from Autosport with different wires for different colors.
http://www.autosportwiring.com/infinity.htm
http://www.autosportwiring.com/images/Nissan%20350Z%20-%20Infinity%20G35.jpg
I soldered everything together I am not fond of crimps, also i taped it up. So now it looks like this:
http://farm2.static.flickr.com/1411/939341441_1b91daab14_b.jpg
This is the V33 Emanage BLUE Wiring Diagram (pdf)
http://www.sendspace.com/file/0iq4ek
greddy_emanage_manual.pdf
http://www.sendspace.com/file/dpaflx
Injector Harness You must wire this up correctly Use the V33 emanage blue pdf file to get it right!
http://farm2.static.flickr.com/1253/939341381_c23b2b4554_b.jpg
Greddy RPM Signal Adapter 1 to ECU RPM
This can go in any particular order.
http://farm2.static.flickr.com/1262/939341675_1e67632dd7_b.jpg
This is the Autosport Wiring Diagram, I color coded it to help, inside the V33 Emanage Blue PDF a better picture of the Pins is there. This will help you with the Autosport Wiring ONLY.
http://farm2.static.flickr.com/1275/939747805_1396b14dc8_o.jpg
All Pins Set to Zero and Verified through the software Using the Giff cable.
http://farm2.static.flickr.com/1255/940705182_46e7d0baf5_b.jpg
Everything All Together.
http://farm2.static.flickr.com/1327/940705032_931ccd12ea_b.jpg
The GIFF cable is from the UK. Some guy invented it and it works from USB to USB. My best guess it has some type of chip or resistor inside it cause Greddy doesnt even have this for the emanage blue. what they have is a USB to Serial, which my laptop doesn't have.
http://www.giffin.plus.com/emanage/
I highly recommend this tool! Its cheap $56.00 and it will allow you to work in REAL TIME like the Emanage Ultimate.
Ps. Try at your own RISK!
First off I ordered a Autosport Wiring Harness so i didn't have to be upside down in the car to splice everything and have some type of error pop up.
The advantage of having this harness is to not have to cut the Factory wiring, and ease of installation. It comes Pre-Labeled from Autosport with different wires for different colors.
http://www.autosportwiring.com/infinity.htm
http://www.autosportwiring.com/images/Nissan%20350Z%20-%20Infinity%20G35.jpg
I soldered everything together I am not fond of crimps, also i taped it up. So now it looks like this:
http://farm2.static.flickr.com/1411/939341441_1b91daab14_b.jpg
This is the V33 Emanage BLUE Wiring Diagram (pdf)
http://www.sendspace.com/file/0iq4ek
greddy_emanage_manual.pdf
http://www.sendspace.com/file/dpaflx
Injector Harness You must wire this up correctly Use the V33 emanage blue pdf file to get it right!
http://farm2.static.flickr.com/1253/939341381_c23b2b4554_b.jpg
Greddy RPM Signal Adapter 1 to ECU RPM
This can go in any particular order.
http://farm2.static.flickr.com/1262/939341675_1e67632dd7_b.jpg
This is the Autosport Wiring Diagram, I color coded it to help, inside the V33 Emanage Blue PDF a better picture of the Pins is there. This will help you with the Autosport Wiring ONLY.
http://farm2.static.flickr.com/1275/939747805_1396b14dc8_o.jpg
All Pins Set to Zero and Verified through the software Using the Giff cable.
http://farm2.static.flickr.com/1255/940705182_46e7d0baf5_b.jpg
Everything All Together.
http://farm2.static.flickr.com/1327/940705032_931ccd12ea_b.jpg
The GIFF cable is from the UK. Some guy invented it and it works from USB to USB. My best guess it has some type of chip or resistor inside it cause Greddy doesnt even have this for the emanage blue. what they have is a USB to Serial, which my laptop doesn't have.
http://www.giffin.plus.com/emanage/
I highly recommend this tool! Its cheap $56.00 and it will allow you to work in REAL TIME like the Emanage Ultimate.